Home Features Pricing Download How to Use Adapters Blog Compatibility Contact

What Can ScanFixAI Do For Your Vehicle?

Select your vehicle below to see exactly what ScanFixAI can do for you.

About 2018+ Chrysler / Jeep / Dodge / Ram Vehicles

Starting in 2018, these vehicles have a Security Gateway that limits what aftermarket tools can do through the OBD2 port. Reading codes, live data, and AI diagnosis all work without any extra hardware. To clear codes and perform service resets, you just need a simple bypass cable (~$25, plugs in with no cutting or splicing).

Pre-2018 vehicles are not affected — everything works out of the box.

Get Bypass Cable on Amazon (~$25) →

Works On Every 1996+ Vehicle (Standard OBD-II)

These features use the standard OBD-II protocol and work on every car, truck, and SUV sold in the US since 1996 — regardless of make or model.

Diagnostics
Read & clear engine/transmission DTCs • Pending codes (before check engine light) • Permanent codes (emissions-critical) • Freeze frame data snapshot • O2 sensor monitoring test results • Emissions readiness / smog pre-check • DTC lookup database (3,806 codes) • AI root cause analysis • AI Mechanic chat (ask any question)
Live Data & Monitoring
Real-time sensor data (RPM, coolant temp, fuel trims, MAF, throttle position, timing advance, and more) • Custom dashboard builder • Live data charting / waveform • HUD mode (windshield projection) • G-force meter • Fuel economy tracking • Flight recorder (continuous logging) • Background CEL monitor (alerts on new codes)
Performance
0-60 mph timer • Quarter mile timer with trap speed • GPS trip logging • Test Drive / Drive Mode (85+ guided tests with voice coaching)
Reports & History
Professional vehicle health report (PDF) • Pre-purchase inspection (PPI) report • Collision pre/post scan comparison • Maintenance schedule tracking • Digital garage (My Vehicles) • Full scan history with timeline • CSV data export
Research & Reference
NHTSA recall lookup (live data) • TSB cross-reference (264 known issues) • Parts cross-reference with pricing • Warranty cost estimator • VIN decoder (build data, options, specs) • NVH diagnosis guide
AI & Smart Features
Photo diagnosis (snap a photo, AI identifies the part/problem) • Voice commands (hands-free operation) • Voice alerts during Test Drive • 21-language support • Demo mode (60 simulated vehicles) • Adapter firmware check

Make-Specific Depth (Vehicle Pro)

Beyond standard OBD-II, ScanFixAI has deep make-specific support for 16 makes with extended PIDs, guided diagnostics, multi-module scanning, as-built/coding, and service resets using real UDS commands.

Ford / Lincoln (FDRS-equivalent)
316 coding options • 9 guided diagnostic trees • 120 extended PIDs • 39 verified modules (8 vehicles profiled) • PATS incode calculator • As-built read/write • MS-CAN support • 80 service functions
BMW / MINI (ISTA-equivalent)
133 coding options • 10 guided diagnostic trees • 120 extended PIDs • 24 verified modules (9 vehicles profiled) • FDL/VO editor • 30 service functions
VW / Audi (VCDS-equivalent)
552 coding options • 12 guided diagnostic trees • 41 extended PIDs • 40+ VCDS controller addresses (6 vehicles profiled) • Long coding • 15 service functions
GM (Chevrolet / GMC / Buick / Cadillac) (GDS2-equivalent)
48 coding options • 9 guided diagnostic trees • 42 extended PIDs • 30 verified modules across 3 architectures (10 vehicles profiled) • SPS config editor • 12 service functions
Toyota / Lexus (Techstream-equivalent)
54 coding options • 9 guided diagnostic trees • 43 extended PIDs • 17 verified CAN addresses (22 vehicles profiled) • Hybrid diagnostics • Customization editor • 15 service functions
Chrysler / Jeep / Dodge / Ram (wiTECH-equivalent)
59 coding options • 11 guided diagnostic trees • 33 extended PIDs • 61 verified modules (14 vehicles profiled) • SGW auto-detection • 12 service functions
Honda / Acura (HDS-equivalent)
48 coding options • 10 guided diagnostic trees • 39 extended PIDs • 14 verified CAN addresses (12 vehicles profiled) • VTEC diagnostics • 12 service functions
Hyundai / Kia (GDS-equivalent)
11 coding options • 11 guided diagnostic trees • 94 extended PIDs • 38 verified modules (14 vehicles profiled) • KSDS/Theta II safety detection • 19 service functions

Additional Makes (Standard OBD-II + Extended Module Support)

Nissan / Infiniti
24 verified modules • 8 CAN addresses • 10 vehicles profiled • Standard OBD-II + UDS
Mercedes-Benz
35+ verified modules • 10 vehicles profiled • SAM/CGW/DoIP architecture
Subaru
14 verified modules • 9 vehicles profiled • SSM4 protocol • EyeSight ADAS • 8 service functions
Mazda
15 verified modules • 9 vehicles profiled • FORScan compatible • i-Stop coding • 8 service functions
Volvo
40+ modules • 8 vehicles profiled • SPA/CMA platforms • VIDA protocol • 11 service functions
Land Rover / Jaguar
42+ modules • 10 vehicles profiled • Terrain Response • Air suspension • 14 service functions
Porsche
25+ modules • 6 vehicles profiled • PASM/PDCC/PSM • Taycan EV • 11 service functions
Mitsubishi
15+ modules • 5 vehicles profiled • ETACS 150+ coding params • PHEV support • 11 service functions
Tesla
12+ modules • 5 vehicles • Battery health • Cell monitoring • Limited OBD-II (proprietary protocols)
Rivian / Lucid / VinFast
EV diagnostics • Battery health • 7 vehicles • Standard OBD-II + EV-specific modules

Totals: 1,175 coding options • 81 guided diagnostic trees • 549 extended PIDs • 264 known issues/TSBs • 275 service functions • 345 vehicles profiled with verified module data • 61 supported makes • 80+ service resets via UDS • EV battery health + charging diagnostics

J2534 Professional Pass-Through Adapters

ScanFixAI supports professional J2534 pass-through adapters for dealer-level diagnostics, module programming, and advanced protocol access. Compatible adapters:

Bosch Mastertech VCI TOPDON RLink OBDLink EX Drew Tech CarDAQ-Plus Autel MaxiSys VCI

J2534 adapters enable module programming, flash updates, and advanced diagnostic protocols beyond what standard ELM327 adapters support.

Additional Pro Features

These advanced features are available with ScanFixAI Pro ($29.99/mo or $249.99/yr):

ⓘ Write features are in Preview. ECU/module programming, key programming, ADAS calibration, TPMS-write and tuning let you explore and simulate now; ScanFixAI writes changes to your vehicle only after we validate each feature on real vehicles per make (enabled in a future update). All scanning, reading, live data, and AI diagnostics work today.
Key Programming — Immobilizer/PATS key learning, best on pre-2018 Ford (Preview — enabled after validation)
ECU Programming — Module flash via J2534 pass-through adapter (Preview — enabled per make after validation)
AI Tuning Advisor — Datalog analysis with recommended fuel/spark/boost targets & safe-limit checks; advisory/simulation, does not write to your vehicle (Preview)
ADAS Calibration — Camera/radar recalibration after windshield or collision work
Cylinder Tests — Power balance + relative compression via cranking RPM
Wiring Diagrams — System-level wiring reference library
Component Locator — Find sensors, modules, and connectors on your vehicle
TPMS Tool — Sensor relearn, read IDs, write new sensor IDs
Injector Coding — Write correction codes after injector replacement (GDI/diesel)
DPF Monitor — Diesel particulate filter health & forced regeneration
Heavy Duty — J1939 protocol support for Class 4-8 trucks
Active Tests — Bidirectional controls (actuate components for testing)
ScanFixAI — AI-Powered Vehicle Diagnostics & Coding
© 2026 ScanFixAI. All rights reserved.